Filter
Top Products
15
Inserting a battery
This digital camera uses one NP-600 lithium-ion
battery. Before using the battery, read the safety
warnings on pages 3 and 4 of this manual. When
replacing the battery, the camera should be
turned off.
Slide the battery-chamber door toward the side
of the camera to release the safety catch (1).
Open the door.
Insert the battery (2).
Close the battery-chamber door (3) and slide it
toward the camera to engage the safety catch.
After initially installing the battery, the menu lan-
guage, clock, and calendar need to be set. The
camera can also reset if the camera is stored
without a battery. See page 21 on how to set up
the camera.
After initially inserting a charged battery, do not remove it from the camera for three hours; the
camera can be off during this period. The lithium-ion battery is used to charge an internal bat-
tery, which protects settings when the camera is turned off.
Camera notes
1
2
3