Filter
Top Products
85
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on
the following page. During installation, if the operating system requests the Windows 98 CD-ROM,
insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special
driver software is required for other Windows or Macintosh operating systems.
Connecting to Windows 98 and 98 SE
Before connecting the camera to the computer, place the DiMAGE Viewer CD-ROM in the CD-ROM
drive. The DiMAGE installer menu should automatically activate. To automatically install the
Windows 98 USB driver, click on the starting-up-the-USB-device-driver-installer button. A window
appears to confirm that the driver should be installed; click “Yes” to continue.
Automatic Installation
When the driver has been
successfully installed, a
window appears. Click
“OK.” Restart the computer
and connect the camera (p.
84) to complete the opera-
tion.