Filter
Top Products
92 DATA-TRANSFER MODE
Pictbridge
Use the left/right keys of the controller to display the
image to be printed.
Repeat the previous steps until all the images to be
printed are selected. Press the menu button to contin-
ue.
Press the up key to select the number of copies to be
printed. No more than 50 images can be selected. To
deselect an image for printing, press the down key
until the number of copies reaches zero.
Total number of prints
Number of copies
Confirm the transfer-mode option in the setup menu
is set to PictBridge. Connect the camera to a
PictBridge compatible printer using the camera’s
USB cable. The larger plug of the cable is connected
to the printer. Insert the smaller plug of the cable
into the camera; the camera turns on automatically
and starts the PictBridge connection.
Individual still images can be selected for printing on
the PictBridge screen. When two memory cards are in the camera, only the images on the card
specified with the memory priority option on the setup menu (p. 75) can be viewed.
Image size
:move :sel. :print
Total: 3 2
1600