Filter
Top Products
90 DATA-TRANSFER MODE
Disconnecting the camera from a computer
Windows Me, 2000 Professional, and XP
Confirm no files are being copied between the camera and computer. Disconnect the USB cable.
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window opens indicating the device to be stopped.
Windows 98 / 98 Second Edition
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This opens the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
Click on the small window to stop the
device. The safe-to-remove-hardware
window opens. Close the window and
then disconnect the USB cable.
Never disconnect the camera when data is being transferred between the camera and com-
puter,