Filter
Top Products
Basic Operations
19
Basic
Operations
3 Check the exposure and bring the camera into focus.
Lightly depress the shutter release button
halfway to set exposure and focus.
Pressing the shutter release button halfway
down (page 20.)
When exposure and the focus are properly set:
The electronic beep is heard and the standby
LED and focus mark come on.
When exposure and focus are not set:
The standby LED and focus mark are flashing
and no electronic beep is heard.
● Repress the shutter release button halfway
down or use the focus lock to set exposure
and focus properly.
● If the focus should improperly be set, the shut-
ter is released to take a picture.
4 Take a picture.
Fully depress on the shutter release button to
take the picture; the shutter sound is heard and
recording of the image begins.
When the standby LED goes off, the shoot-
ing is completed.
DISP.
MENU
“Beep”
DISP.
MENU
DISP.
MENU
“Beep”
DISP.
00_8CQ.book Page 19 Wednesday, May 14, 2003 8:10 PM