Filter
Top Products
Miscellaneous
Printing
- 193 -
You can connect directly to a PictBridge-compatible printer for printing.
Connect the camera to the printer
• Do not use cables other than the supplied genuine Leica USB cable. Using cables
other than the above may cause a malfunction.
Use cursor buttons on the camera to select [PictBridge(PTP)]
and then press [MENU/SET]
Use cursor buttons to select the picture to print and then
press [MENU/SET]
Use cursor buttons to select [Print start] and then press
[MENU/SET]
(Print settings (→196))
■
To cancel print
Press [MENU/SET].
Make sure the plug is aligned correctly and that
it is inserted straight.
(Otherwise the connectors may be bent out of
shape which will cause trouble.)
• Do not disconnect the USB cable
when the cable disconnection
icon [ ] is displayed (may not be
displayed with some printers).
USB cable
Preparation:
• Charge the battery sufficiently.
• When printing pictures from the
built-in memory, remove any memory
cards.
• Adjust the print quality or other
settings on your printer, as needed.
• Turn on the camera and the printer.