Filter
Top Products
Using the Main Menu
37
Overwrite
Use the overwrite feature to have the system overwrite the oldest recorded data on the SD card
once the SD card is full.
To enable overwrite:
1. From the Main Menu select Record and press the Enter/OK button.
2. From the record Menu select Overwrite and press the Enter/OK button.
3. Select Yes and press the Enter/OK button.
4. Press the Menu button until all menu windows are closed.
NOTE: If you do not enable Overwrite, the system will prompt you when the SD card is full
(flashing red icon). Also, when the SD card is full, a blue LED will light up under “FULL” on the
wireless receiver. You will need to manually delete files from the SD card or insert a new SD card
into the wireless receiver. For details, see “Appendix E: Deleting Video Files on the System” on
page 52.
Figure 10.4 Overwrite enable/disable