Filter
Top Products
Using the Main Menu
45
Format
Use the Format menu to format the SD card. It is highly recommended to format the SD card
prior to initial recording.
To format the SD card:
1. Insert the SD card into the SD card slot on the right panel of the wireless receiver until you
hear a “click.” Please insert the card according to the diagram on the receiver.
2. From the Main Menu, select Setting and press the Enter/OK button.
3. From the Settings menu, select Format and press the Enter/OK button.
4. Select Yes and press the Enter/OK button. Please allow a few moments for formatting to
finish. Formatting time will vary depending on the size of the SD card.
ATTENTION: Formatting erases all video data on the SD card. This step
cannot
be
undone.
Figure 12.5 Format menu