Filter
Top Products
Using the Main Menu
43
Overwrite
Use the overwrite feature to have the system overwrite the oldest recorded data on the SD card
once the SD card is full.
To enable overwrite:
1. From the Main Menu select Record and press the Enter button.
2. From the record Menu select Overwrite and press the Enter button.
3. Select Yes and press the Enter button.
4. Press the Menu button until all menu windows are closed.
NOTE: If you do not enable Overwrite, the system will prompt you when the SD card is full by two
ways: the SD Card icon on the OSD will be solid blue and a blue LED will light up under “FULL” on
the wireless receiver. You will need to manually delete files from the SD card or insert a new SD
card into the wireless receiver. For details, see “Appendix E: Deleting Video Files on the System”
on page 60.
Figure 12.4 Overwrite enable/disable