Filter
Top Products
ķ
51
TTL flash mode (Standard-TTL)
Preflash measuring beam with TTL control (e.g. for Olympus and Sony)
Red-eye reduction preflash
Manual TTL flash exposure correction
Canon E-TTL flash mode
Canon FE flash exposure lock
Nikon matrix-controlled fill-in flash
Nikon 3D multi-sensor fill-in flash
Nikon D-TTL / D-TTL-3D flash mode
Nikon i-TTL / i-TTL-BL flash mode
Nikon flash exposure lock
Minolta TTL preflash mode / ADI
Automatic flash mode
Manual flash mode with partial light output settings
Slave mode with simultaneous optical triggering with SCA 3083 digital
Slave mode with preflash suppressions with SCA 3083 digital
Slave mode in cordless Metz Remote System with SCA 3083 digital
Manual / automatic aperture setting
Manual / automatic ISO setting
AF measuring beam control with connecting cable SCA 3045
Flash readiness indication in camera’s viewfinder or camera display
Correct exposure indication in camera’s viewfinder or camera display
Automatic flash sync speed control
1st/2nd curtain synchronisation (REAR; 2nd curtain))
Slow synchronisation (Slow)
High-speed synchronisation (HSS)
••
•
•
••
•
•
••
•
•/•
•/•
•
•/•
•• •
•• •
•
•
•
•/• •/- •/-
•/• •/- •/-
•
••
••
••
•/• •/• •/-
••
•
SCA 3002 - System
SCA SCA 300 - System
Standard foot SCA 301 or
Synch cable 45-47
2. Survey of the flash functions
A multitude of additional functions become available when the mecablitz 45CL-
4 digital is operated with an SCA adapter of the SCA 3002 or SCA 300 sys-
tem. This requires the connecting cable SCA 3045 (SCA 3002 and SCA 300
adapter) or the connecting cable SCA 300A (only SCA 300 adapter) as an
optional accessory!
Availability depends on the given camera system (camera manufacturer), the
specific type of camera and the SCA adapter. For more detailed information ple-
ase refer to the SCA Survey Table or the respective SCA Adapter Operating
Instructions.
Table 1: Survey of the flash functions
704 47 0126.A5 45 CL-4 digi 01.02.2007 13:13 Uhr Seite 51