Nikon 1542 Digital Camera User Manual


 
102
Release Mode
To choose a release mode, press the
release mode dial lock release and turn
the release mode dial to the desired
setting.
Choosing a Release Mode
Mode Description
S
Single frame: Camera takes one photograph each time shutter-
release button is pressed.
T
Continuous low speed: While shutter-release button is held down,
camera takes photographs at frame rate selected for Custom
Setting d2 (CL mode shooting speed, 0321).
Lower built-in
flash (0 190); continuous release is not available while flash is
raised.
U
Continuous high speed: While shutter-release button is held down,
camera takes photographs at frame rate given on page 104.
Use for active subjects.
Lower built-in flash (0 190);
continuous release is not available while flash is raised.
J
Quiet shutter-release: As for single frame, except that mirror does
not click back into place while shutter-release button is fully
pressed, allowing user to control timing of click made by
mirror, which is also quieter than in single frame mode.
In
addition, beep does not sound regardless of setting selected
for Custom Setting d1 (Beep; 0 321).
M
Qc (quiet continuous) shutter-release: While shutter-release button
is held down, camera takes photographs at frame rate given
on page 104.
Camera noise is reduced.
Lower built-in flash
(0 190); continuous release is not available while flash is
raised.