Filter
Top Products
180
Sharing Custom Picture Controls
Use the Load/save option in the Manage Picture Control menu
to copy custom Picture Controls to and from memory cards.
Custom Picture Controls can be created on a computer using
Picture Control Utility 2, a utility launched from ViewNX 2
(supplied) or CaptureNX-D, then saved to a memory card and
copied to the camera.
Custom Picture Controls created on the
camera can be copied to a memory card for use in other D810s.
Once the copies are no longer needed, they can be deleted
using the Delete from card option.
To copy custom Picture Controls to or
from the memory card, or to delete
custom Picture Controls from the
memory card, highlight Load/Save in
the Manage Picture Control menu and
press 2.
The following options will be
displayed:
• Copy to camera: Copy custom Picture Controls from the memory
card to custom Picture Controls C-1 through C-9 on the camera
and name them as desired.
• Delete from card: Delete selected custom
Picture Controls from the memory
card.
The confirmation dialog shown
at right will be displayed before a
Picture Control is deleted; to delete the
selected Picture Control, highlight Ye s
and press J.
• Copy to card: Copy a custom Picture Control (C-1 through C-9)
from the camera to a selected destination (1 through 99) on
the memory card.