Filter
Top Products
124
AVAILABLE SPEEDLIGHT AND FLASH FUNCTIONS
The table below shows the available flash modes for each Nikon
Speedlight.
When using Programmed Auto exposure mode
Only TTL auto flash mode can be used.
Speedlight Connection
Available flash mode
TTL Auto
1)
Non-TTL Auto
2)
Manual
3)
SB-28/28DX, SB-27, SB-26, SB-25,
SB-24, SB-22s, SB-22, SB-20, Direct Yes Yes Yes
SB-16B
2)
and SB-15
SB-50DX, SB-29, SB-23 and SB-21B
2)
Direct Yes No Yes
SB-21A
2)
and SB-16A
2)
Via Flash Unit Coupler AS-6 No Yes Yes
Via TTL Remote Cord SC-23 Yes Yes Yes
SB-11, SB-14 and SB-140
4)
Via Sensor Remote Cord SC-13
with sensor unit or Sync Cord No Yes Yes
SC-11 or SC-15
1) In TTL auto flash mode, the F5 performs Automatic Balanced Fill-Flash or stan-
dard TTL flash. For details, see pages 109-113.
2) The difference between SB-21A and SB-21B, or between SB-16A and SB-16B,
is the type of controller attached. (For details, see the relevant Speedlight
manual).
3) Set the F5’s exposure mode to Aperture-Priority Auto or Manual.
4) Ultraviolet and infrared photography can be performed in manual flash mode
only.
: Automatic Balanced Fill-Flash possible.
P400 (E) 02.12.27 6:42 PM Page 124