Filter
Top Products
87
3
Take next shot.
Multiple exposure is canceled auto-
matically and the film advances to the
next frame. Z disappears from the top
LCD panel.
•Note that in multiple exposure
operation, exposure compensation
will be required depending on
subject brightness, background
brightness and number of expo-
sure. You must determine the
necessary exposure compensation
and make adjustment.
•When data imprint is selected on
the MF-28 or MF-27 camera back,
the data is imprinted only at the
first shot.
c
You can set
multiple expo-
sure mode to remain on after taking
the second shot using Custom
Setting #13. See page 89.
To cancel multiple exposure mode in
this case, rotate the Main-Command
Dial while pressing Z (multiple expo-
sure) button so Z disappears from
the top LCD panel.
To take more than two shots on the
same frame, rotate Main-Command Dial
while pressing Z button before taking the
second shot (while Z is blinking in top
LCD panel). The shutter can be released
on the same frame as many times as
desired until multiple exposure is
canceled.
To cancel multiple exposure before
taking first shot, rotate Main-Command
Dial while pressing Z button so Z disap-
pears from the top LCD panel.
•Multiple exposure cannot be canceled
after taking the first shot. To avoid
exposure, cover the lens with a lens cap
and take the second shot.
P400 (E) 02.12.27 6:42 PM Page 87