Filter
Top Products
FILM REWIND CRANK—To rewind film
manually
97
USING NON-DX CODED FILM
With non-DX coded film, rotate the Main-Command Dial while
pressing the ° (film speed) button to set film’s ISO number in
the rear LCD panel. The usable range for manual film speed
setting is ISO 6 to 6400 in 1/3 steps.
•If DX-coded film is loaded but manual film speed setting is
selected, camera gives priority to the manually set ISO
number.
1
To rewind film manually, press the film rewind button 1 „,
then lift the film rewind crank and turn in the direction of
arrow until the film leader is rewound completely back into the
cartridge.
Turn the film rewind crank a few times more after the tension is
gone.
•Frame counter counts backward when film is rewound manu-
ally with the meter on.
•Do not press the shutter release button until the film leader is
rewound completely back into the cartridge. Doing so may
damage the shutter curtain.
P400 (E) 02.12.27 6:42 PM Page 97