Filter
Top Products
79
Auto Exposure/Flash Exposure Bracketing
In situations where you might find it difficult to obtain a proper
exposure, Auto Exposure/Flash Exposure Bracketing lets you
shoot the same subject at two or three different exposures, with
a variable exposure compensation degree of 0.3 EV, 0.7 EV or
1 EV.
If you set a compensation degree of 1 EV in a three-step
bracket for example, you will take three pictures, the first shot
having no compensation, the second shot having a –1 EV
compensation and the third shot having a compensation of
+1 EV.
1
Rotate Main-Command Dial while pressing the ‚ (Auto
Exposure/Flash Exposure Bracketing) button to select Auto
Exposure/Flash Exposure Bracketing mode. z appears in the
top and rear LCD panels and = blinks in the top LCD panel and
the viewfinder while the exposure meter is on.
c
In Auto Exposure/Flash Exposure
Bracketing, you can set Custom
Setting #3 to start shooting with negative compensation,
no compensation and positive compensation in that order.
See page 88.
You can perform only Auto Exposure Bracketing or Flash
Exposure Bracketing using Custom Setting #24. See page
90.
P400 (E) 02.12.27 6:42 PM Page 79