Filter
Top Products
43
•Single Servo AF is convenient for off-center subjects. See
pages 70-71.
•After shooting with the film advance mode selector set at
S, you do not have to remove your finger from the shutter
release button to take the next shot. Slightly lift your
finger from the button (while maintaining the button in the
half-depressed position) then fully depress it to release
the shutter again. The focus setting will remain
unchanged from the prior setting. In Single Servo AF with
Focus-Priority mode, the focus remains locked even after
the shutter is released, unless you remove your finger
from the shutter release button.
With the film advance mode set at CL, CH or CS, the
camera refocuses every time the shutter is released.
> Lens is focused at rear of the subject.
< Lens is focused at front of the subject.
? If ? blinks in the viewfinder: Autofocus is not
possible. See page 146.
With a moving subject: Lightly press shutter release button to
automatically activate Focus Tracking. Confirm / appears in the
viewfinder, then fully depress the shutter release button. (The
shutter release button can in fact be depressed without confirm-
ing / indication; as soon as the subject comes into focus, the
shutter will be released.)
Focus Tracking remains activated as long as you keep the shut-
ter release button lightly pressed. If the subject stops and /
appears, focus is locked. If subject moves again, remove your
finger from the shutter release button and lightly press it again to
start autofocus with Focus Tracking.
c
> and < display in viewfinder in
Autofocus mode can be canceled
using Custom Setting #23. See page 90.
P400 (E) 02.12.27 6:42 PM Page 43