The following are important notes about the camera's waterproofing. Before
using the camera, please thoroughly read the information in “<Important>
Shockproof, Waterproof, Dustproof, Condensation” (Axii).
Waterproofing-related Messages
The camera will display messages related to its waterproof capabilities when
you select certain settings or perform certain operations. Read and follow the
information displayed in the messages when they are displayed.
Waterproofing-related messages are displayed in the following situations.
• When turning on and setting the camera for the first time
• When setting the camera to Underwater (A41)
• When turning the camera on after charging
Warning: If the cover is closed without removing foreign particles, water may
seep inside the camera or the camera may become damaged.
Make sure to check and clean the camera.
Waterproofing
3/6
2/6
4/6
1/6
5/6 6/6
a brush or blower.
Remove any foreign matter with
about 10 minutes.
use, immerse in fresh water for
To remove foreign matter after
indicated.
remaining on the areas
cloth to remove any droplets
After drying thoroughly, use a
dry.
droplets and place on a cloth to
Next, wipe o any water
Exit
close the covers.
is present where shown, then
Conrm that no foreign matter
camera.
foreign matter could enter the
water or in sandy locations, as
Do not open the covers by the