Filter
Top Products
51
Shooting Features
Using Macro Mode
Use macro mode when taking close-up images.
1 Press the multi selector I (p).
2 Select o and press the k
button.
• If a setting is not applied by pressing the k
button within a few seconds, the selection
will be canceled.
3 Move the zoom control to set the
zoom ratio to a position where F
and the zoom indicator glow
green.
• When the zoom ratio is set to a position where the zoom indicator glows
green, the camera can focus on subjects as close as approximately 10 cm
(4 in.) from the lens.
At the wide-angle zoom position from G, the camera can focus on subjects
as close as approximately 1 cm (0.4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1
ft 8 in.).
C The Macro Mode Setting
• The setting may not be available with some shooting modes.
• The setting applied in A (auto) mode is saved in the camera’s memory even after
the camera is turned off.
Macro mode
40