Filter
Top Products
48
Shooting Features
Using the Flash
You can select the flash mode to match the shooting conditions.
1 Press the multi selector H (m).
2 Select the desired flash mode
(A49) and press the k button.
• If a setting is not applied by pressing the k
button within a few seconds, the selection
will be canceled.
B The Flash Lamp
• The status of the flash can be confirmed
by pressing the shutter-release button
halfway.
- On: The flash fires when you press the
shutter-release button all the way
down.
- Flashing: The flash is charging. The
camera cannot shoot images.
- Off: The flash does not fire when an image is taken.
• If the battery level is low, the monitor turns off while the flash is charging.
Auto
40
30