Nikon 26468 Digital Camera User Manual


 
E85
Reference Section
B Notes About Log Recording
If the date and time are not set, the log cannot be recorded.
Use a fully charged battery to prevent the camera from turning off during log
recording. When the battery power becomes exhausted, log recording ends.
While the altitude log or water depth log is recorded, the battery is exhausted
much faster. Exercise caution regarding the remaining battery level.
Even when the camera is turned off, log recording is continuously performed until
the preset time has elapsed if there is still time remaining for log recording.
Log recording ends due to the operations below even when there is time
remaining for log recording.
- The battery is removed
- Record location data in Location data options is set to Off when the
location log is recorded
- Reset all in the setup menu is performed
- The setting of the internal clock (time zone or date and time) is changed
- An option to end log recording is selected in Create log on the Location data
options menu (E83)
Log recording is paused during the operations below.
- During continuous shooting
- During movie recording
- When connected with a USB cable or HDMI cable
Log recording is resumed when the above operations are finished. However, to
resume log recording after using the charging AC adapter, you must turn on the
camera after disconnecting the USB cable from it.
The log data is temporarily stored in the camera. New logs cannot be recorded if
the log data remains in the camera. After recording log data, save it to a memory
card.
See “Log Data Saved on Memory Cards” (E100) for more information.
C To Erase Log Data
To erase the log data that is temporarily stored in the camera, select Erase logs in
step 5.
To erase the log data that is stored on the memory card, press the l button in
View log (E86).