Filter
Top Products
20
The Basics of Shooting and Playback
8 Read the message about the
waterproof function, and press K.
• There are 6 message screens.
9 When you have read the message
shown on the right, press the k
button.
• The camera switches to shooting mode
(A22).
C Changing the Language Setting and the Date and Time Setting
• You can change these settings using the Language and Time zone and date
settings in the z setup menu (A76).
• You can enable or disable daylight saving time in the z setup menu by selecting
Time zone and date followed by Time zone. Enabling daylight saving time
moves the clock forward one hour, and disabling it moves the clock back one hour.
C The Clock Battery
• The camera’s clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or
when the camera is connected to an optional AC adapter, and it can run the clock
for several days after about 10 hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting
screen is displayed when the camera is turned on. Set the date and time again. See
step 3 (A18) of “Preparation 4 Setting the Display Language, Date, and Time” for
more information.
C Imprinting the Shooting Date on Printed Images
• You can permanently imprint the shooting date on images as they are captured by
setting Print date in the setup menu (A76).
• If you want the shooting date to be printed without using the Print date setting,
print using the ViewNX 2 software (A94).
1/6
camera.
foreign matter could enter the
water or in sandy locations, as
Do not open the covers by the
6/6
indicated.
remaining on the areas
cloth to remove any droplets
After drying thoroughly, use a
Exit