Filter
Top Products
F12
Technical Notes and Index
No image captured
when the shutter-
release button is
pressed.
• When the camera is in playback mode,
press the A button, the shutter-release
button, or the b(e movie-record)
button.
• When menus are displayed, press the d
button.
• The battery is exhausted.
• When the flash lamp is flashing, the flash is
charging.
• The camera and smart device are
connected using Wi-Fi connection and the
camera is operated by remote control.
30
6
22
48
89
Camera cannot focus.
• The subject is too close. Try shooting with
macro mode, G (easy auto) mode or
Close-up scene mode.
• The subject is hard to focus on.
• Set AF assist in the setup menu to Auto.
• Turn the camera off and then on again.
33, 37,
51
63
76,
E69
22
Images are blurred.
• Use the flash.
• Increase the ISO sensitivity value.
• Enable vibration reduction or motion
detection.
• Use j (Best Shot Selector).
• Use a tripod to stabilize the camera when
shooting (using the self-timer at the same
time is more effective).
48
56
76
38, 56,
E34
50
Bright specks appear
in images captured
with flash.
The flash is reflecting off particles in the air. Set
the flash mode setting to W (off).
49
Flash does not fire.
• The flash mode is set to W (off).
• A shooting mode that restricts the flash is
selected.
• On
is selected for Bl
ink proof in the smart
portrait menu.
• On is selected for Smile timer in the smart
portrait menu.
• A function that restricts the flash is enabled.
48
53
57
57
58
Problem Cause/Solution A