Filter
Top Products
z
The Exposure Compensation indication is displayed on the Control panel and both and the compensation
value are shown on the Monitor when the Exposure Compensation is set.
Check point
The flash output level is also adjusted when the Speedlight is used. To adjust only the flash output level and leave the
exposure metering as determined by the camera, select Speedlight Opt. > Variable Power
in the Shooting SET-UP menu.
-- Exposure mode --
The Exposure mode can be selected by pressing the Multi selector instead of using the
MODE
button and the
COMMAND
dial. This option cannot be selected if MODE is assigned to either the
FUNC. 1
or
FUNC. 2
button in the Controls
setting in the
Shooting SET-UP menu. See Setting the Exposure mode for the characteristics of the Exposure modes and details on using
them.
Check point
Set the shutter speed in the
S
exposure mode or the aperture in the
A
exposure mode by rotating the
COMMAND
dial as
described in Setting the Exposure mode
. However, in
M
exposure mode, set
M (A)
to select the aperture and
M (S)
to select
the shutter speed by rotating the
COMMAND
dial.
Focus options
You can use the
Focus Options
menu to select the
AF Area Mode
, change the
Auto-Focus Mode
, select
Focus
Confirmation
or change the
Distance Units
.
Pa
g
e 86 of 136
N
ikon COOLPIX995 Di
g
ital Camera
3/15/2002htt
p
://www.livemanuals.com/
p
acka
g
es/
p
roducts/NK002/2136/manual/fullmanual.html