Filter
Top Products
Tutorial—First Steps
18
Step 3—Check the Battery Level
Before using the camera, check the battery level in the monitor to make sure
that the battery is charged.
3
.1 Turn the lens section to shooting position
Before taking pictures, rotate the lens sec-
tion to bring the lens into shooting position,
as shown at right. If you omit this step be-
fore sliding the mode selector to , a mes-
sage will be displayed in the monitor. To
clear the message from the screen, rotate
the lens section to shooting position.
3
.2 Turn the camera on
Slide the mode selector to .
Read Battery Warnings
Read and follow all warnings and instructions supplied by the battery
manufacturer.
The Lens Section
When adjusting the angle of the lens, rotate the
lens section slowly; do not use excessive force.
Care should be taken to avoid catching fingers,
hair, or clothing between the lens section and the
camera body.
Removing the Memory Card
Memory cards can be removed without loss of data
when the camera is off. When removing memory
cards, turn the camera off and open the battery
chamber/card slot cover (1). Press the eject but-
ton to partially eject the card (2), and then remove
the card by hand.
1
2