Filter
Top Products
21
Quick Guide—continued
20
5
Press the Shutter release button lightly to focus on the subject by
using autofocus. (p. 48).
• The Green LED lights when the subject is in focus and flashes rapidly when
the camera cannot autofocus.
In-focus Out-of-focus
Green LED lights. Green LED flashes.
6
Use the built-in Speedlight if there is insufficient light to illuminate
the subject (p. 50). This condition is indicated by the Red LED
flashing rapidly when the Shutter release button is half-pressed.
• Slide the Speedlight lock-release lever to release the built-in Speedlight.
7
Slowly and fully depress the Shutter release button to take the
picture (p. 49).
• A single beep sound indicates that the shutter has been released.
8
Press the QUICK button to check the picture immediately
(p. 51).
• Photographs stored on the CF memory card can be reviewed using the
button. Press the button to view the image in the top left corner of
the Monitor.
• Press the button again to see the image full screen.
• Use the Zoom button to enlarge the image and use the Multi selector to scroll
to hidden parts of the picture.
Quick review mode Full-screen review
mode
9
Set the Mode dial to when you have finished taking
photographs.
Deleting images
You can delete the image in the Full-screen review mode. See step 6 of “Basic
Operation (Auto mode)” on p. 52.
Before Using the Camera
COOLPIX995 (E) 01.5.30 0:37 PM Page 20