Nikon Coolpix 995 Film Camera User Manual


 
91
Sync Terminal
90
External Nikon Speedlights can be accommodated by using the
optional Multi-Flash Bracket Unit SK-E900.
1
Remove the Sync terminal cover and connect the camera plug of
the multiple flash adapter.
The following Nikon optional Speedlights can be used: SB-28DX, SB-28, SB-
26, SB-25, SB-24, SB-22s and SB-22. Please contact an authorized Nikon
dealer or service center about using other Nikon Speedlights.
In Macro close-up mode, it is recommend that you take trial shots and
confirm that the image in the Monitor is correctly exposed.
Set the Zoom-head position wider than 28mm.
The Power Zoom function of Speedlights does not function when attached to
the COOLPIX995. Please set the Zoom-head position manually.
The AF assist illuminator of the Speedlight does not illuminate.
For the basic functions and operations of Multi-Flash Bracket Unit SK-E900
and optional Speedlights, please refer to the instruction manuals supplied
with each accessory.
Check point
With the Speedlight Opt. > Int Flash Off in Shooting SET-UP menu , it is
possible to set the built-in Speedlight so that it does not fire, and to fire the
external Speedlight only (p.133).
Note: Flash Units Made by Manufacturers other than Nikon
Use only Nikon Speedlights. Other units may damage the camera's electrical
circuitry due to incompatible voltage requirements, electric contact alignment or
switching phase.
Note: Activating an Optional Speedlight
When using an optional Speedlight, make sure to raise the built-in Speedlight to
operational position (even if the Int Flash Off setting is set on the built-in
Speedlight) to ensure that the flash sync sensor is activated.
Using the Camera
Menus
This section describes the menus used to manage
the more advanced features available on the
COOLPIX995.
Separate menus are available for each mode:
The Menus share a common operation method, making it
easy for you to learn and remember how to navigate
around the menus and make selections quickly and
confidently.
Menu
Shooting
SET-UP
Playback
Function
Advanced Shooting options
(e.g., White Balance,
Metering, Continuous)
Basic camera setup (e.g.,
formatting CF memory cards,
setting date/time). SET-UP
menus for the and ˘
modes are accessible from
the Shooting and Playback
menus respectively.
The options available depend
on the operation mode
Playback options
Mode
˘
˘
Page
92-119
120-129
120-135
148-152
136-147
Menu Function Mode Page
Menus
COOLPIX995 (E) 01.5.30 0:41 PM Page 90