Filter
Top Products
117116
Setting Shooting Menus—continued
Shooting Mode
• The Exposure Compensation indication ≠ flashes on the Control panel and
along with the compensated EV value for the next shot are displayed on the
Monitor when the bracketing is set.
— WB Bracketing —
White balance is bracketed when you press the Shutter release button
fully, giving three shots made up of one shot with the selected white
balance, one reddish image and one bluish image.
• When you select White Balance Bracketing, the (White Balance
Bracketing indication) appears on the Monitor.
Notes: Auto Bracketing and White Balance Bracketing
• Bracketing cannot be set in Multi-shot 16, Ultra HS, Movie (p. 99), Best
Shot Selector (p. 102), AE Lock (p. 109) or Noise Reduction mode.
• White balance bracketing cannot be set in Continuous mode other than
Single (p. 99), Best Shot Selector mode, AE Lock mode or Noise
Reduction mode .
Check point
To perform Auto Bracketing or White Balance Bracketing in Continuous or VGA
Sequence mode (p. 99), hold down the Shutter release button fully. A selected
number of consecutive shots are taken (up to three shots with FULL, 3 : 2 and
Fine mode), after which the sequence stops automatically.
NOISE REDUCTION
When the camera is set for long time exposures, noise in the form
randomly spaced bright-colored pixels will appear. The longer the
exposure, the more this effect is apparent. The Noise Reduction setting
can be used to minimize this effect.
On The effect of noise on the recorded image is minimized.
Off Noise reduction is canceled and normal exposure control is used.
Note: Time taken to save an image to the CF memory card
When the Noise Reduction function is on, the time taken to save a picture to
the CF memory card is approximately doubled.
Menus
COOLPIX995 (E) 01.5.30 0:42 PM Page 116