Filter
Top Products
105104
IMAGE ADJUSTMENT
When you take a photograph, the camera automatically compensates
for optical brightness and contrast before recording the photograph on
the CF memory card. The Image Adjustment menu gives you control
over this image compensation.
Auto Image is adjusted automatically.
Normal
Image adjustment is fixed at
standard level
More Contrast Increases the image contrast
Less Contrast Decreases the image contrast
Lighten Image Increases the image brightness
Darken Image Decreases the image brightness
Setting Shooting Menus—continued
Shooting Mode
Option Description
Auto
The camera automatically adjusts the contrast and brightness of the
image according to shooting conditions.
Normal
The camera performs same standard brightness and contrast
adjustment for all images. This setting is recommended for images
that will later be retouched on a computer.
More Contrast
The image is processed to emphasize the difference between light and
dark areas. This is useful when shooting landscapes and foggy or
cloudy scenes.
Less Contrast
The image is processed to reduce the difference between light and
dark areas. This is useful in conditions where the light is very bright
with strong shadows cast on the subject.
Lighten Image
Increases the brightness of mid-tones in the image without affecting
detail in the highlights and shadows. This setting can be used on
images that appear too dark when displayed or printed.
Darken Image
Decreases the brightness of mid-tones in the image without affecting
detail in the highlights or shadows. This setting can be used on
images that appear too bright when displayed or printed.
• The Image Adjustment indication is displayed
on the Monitor when an Image Adjustment
other than Auto or Normal is set.
SATURATION CONTROL
Adjust the Saturation to control the intensity of color in the picture. In
this mode, you can specify a B&W (black-and-white) image.
+1 Maximum Sets the saturation level to +1.
0 Normal Sets the saturation level to normal.
–1 Moderate Sets the saturation level to –1.
–2 Minimum Sets the saturation level to –2.
B&W Sets image to black-and-white.
Option Description
+1 Maximum
Increases the color saturation of the image. Suitable for direct printing
where a photo-print effect is required.
0 Normal Sets the saturation control level to normal. Saturation can be decreased to
–1 Moderate normal to –1 (moderate ) or –2 (minimum). Suitable for images intended
–2 Minimum for subsequent retouching or manipulation on a computer.
B&W
Images are recorded as monochrome data and the display on the Monitor
also changes to black-and-white. The size of the image file is the same as
for the color image but the resolution is higher.
• The B&W (black-and-white) indication is displayed on
the Monitor when B&W is selected.
Menus
COOLPIX995 (E) 01.5.30 0:42 PM Page 104