97
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
h Sound Settings
Adjust the following sound settings:
i Auto Off
Choose the time allowed to elapse before the cam-
era enters standby mode to save power. The cam-
era will turn off automatically if no operations are
performed for three minutes after entering standby
mode.
j Auto Off
Regardless of the option selected, the monitor will remain on for a minimum of three minutes
when menus are displayed, and for thirty minutes during a slide show.
Button sound
When [On] (default setting) is selected, beep will sound once when operations
are completed successfully, three times when error is detected.
Shutter sound
Choose volume of shutter sound from [Loud], [Normal] (default setting), and
[Off].
Start-up sound
Choose volume of sound that plays when camera is turned on from [Loud],
[Normal] (default setting), and [Off].
Auto off
Choose the time allowed to elapse before the camera enters standby mode
when no operations are performed from [30s], [1m] (default setting), [5m], and
[30m].
Sleep Mode
If [On] is selected, the camera will enter standby mode when there is no change
in the brightness of the subject, even before the time selected in the auto off
menu has elapsed.
The camera will enter sleep mode after 30 seconds when [Auto off] is set to
[1m] or less, or after 1 minute when [Auto off] is set to [5m] or more.
Sound settings
Button sound
Shutter sound
Start-up sound
MENU
Exit
ON
Auto off
Auto off
Sleep Mode
MENU
Exit
1m
OFF