115
Technical Notes
WARNING!!
NO MENU IN AUTO
MODE
PLEASE USE ANOTHER
MODE
u
m was pressed dur-
ing X mode.
When the mode dial is set to X, menu
cannot be displayed.
–
LENS ERROR
u
Error has occurred dur-
ing lens operation.
Turn camera off and then on again. If
error persists, contact local retailer or
Nikon representative.
P.24
COMMUNICATIONS
ERROR
E
USB cable disconnected
or memory card
removed while images
are being transferred to
computer.
If error appears on computer monitor,
click OK to exit PictureProject. Turn cam-
era off, reconnect cable or replace mem-
ory card, then turn camera on and
transfer images.
P.20,
P.62
A computer is execut-
ing some form of pro-
cessing.
If error appears on computer monitor,
click OK and transfer images after pro-
cessing has completed.
–
USB option set incor-
rectly to transfer
images using camera’s
d (Transfer g) but-
ton.
Turn camera off and disconnect cable,
then choose new USB setting in the cam-
era Set-up menu and reconnect camera.
If error persists, use Transfer button in
PictureProject to transfer images.
P.62,
P.64,
P.66
NO IMAGES ARE
MARKED FOR TRANSFER
s
No pictures selected for
transfer when d
(Transfer g) button
pressed to transfer
images to computer.
• Disconnect camera and select at least
one picture for transfer, then begin
transfer again.
• Use Transfer button in PictureProject
to transfer images.
P.62,
P.64,
P.66
TRANSFER ERROR
E
Error occurred when
images were trans-
ferred to computer.
• Check that camera is connected and
that battery is fully charged.
• Check that optional EH-62A AC
adapter kit is firmly connected to the
camera.
P.62
P.24
–
SYSTEM ERROR
u
Error has occurred in
camera’s internal cir-
cuitry.
Turn camera off, unplug optional AC
adapter (if using), remove and reinsert
battery, and turn camera on. If error per-
sists, contact local retailer or Nikon repre-
sentative.
P.18
PRINTER ERROR
CHECK PRINTER
STATUS
Printer error occurred
on your printer.
See the manual for the printer and solve
the problem.
–
Display Problem Solution Page
u