Filter
Top Products
81
Advanced Camera Settings – The Shooting Menu
Restrictions on Continuous Shooting
• Settings other than Single cannot be used in combination with BSS (P.82), Auto bracketing or
WB bracketing (P.83). The previous setting is used and the earlier setting is canceled.
• Noise reduction (P.88) has no effect even if set to On.
•With Continuous, Multi-shot 16, Ultra HS, and 5 shot buffer, settings for focus, exposure,
and white balance are determined by the first shot in each series. The flash is automatically set
to B (Flash Cancel).
• Digital zoom (P.25) cannot be used at settings of Multi-shot 16 or Ultra HS.
• When using the self-timer, Single is automatically set. The settings will return to the previous
setting after an image has been taken using the self-timer.
Ultra HS
• During shooting, progress is shown on the monitor, from S to E. To in-
terrupt shooting before 100 pictures have been recorded, lift your fin-
ger from the shutter-release button.
• During shooting, pressing T while the y icon appears displays the de-
lete confirmation dialog. From this screen, you can delete all the pic-
tures in the same sequence.
• During shooting, the shutter sound is off.
5 Shot Buffer
If Image size is set to c 3264×2448 or j 3264×2176 and Image quality is set to FINE, only the
last three images taken in a series will be recorded.
Note on Interval Timer Shooting
To prevent shooting from ending unexpectedly, use the optional EH-62A AC adapter kit.
Interval Timer Shooting
• To save power, the monitor turns off and the power on lamp starts blinking between shots. The
display turns on automatically immediately before the camera takes the next shot.
• Do not rotate the mode dial during the interval between shots.