Nikon COOLPIX P4 Digital Camera User Manual


 
47
Additional Shooting Options
Preset White Balance
Preset white balance is used when shooting under mixed
lighting or to compensate for light sources with a strong
color cast (for example, to make pictures taken under an in-
candescent light look as though they had been taken under
white light).
When White bal. preset is selected in the WHITE BAL-
ANCE menu, the camera will zoom in and the menu shown
at right will be displayed on the monitor.
Notes on Preset White Balance
The camera cannot measure a value for preset white balance when the flash fires. Regardless of
the flash mode selected, the flash will not fire when selecting Measure.
Preset white balance cannot be used when AUTO BRACKETING is set to WB bracketing.
If the mode dial is set to c, the lens does not extend when turning the camera on.
The lens extends only after pressing d when you select White bal. preset in the WHITE BAL-
ANCE menu.
Cancel
(default setting)
Maintains the most recent value and uses it for white balance.
Measure
To measure a new value for white balance, place a neutral gray object,
such as a piece of cardboard, under the lighting that will be used when
shooting. Frame the object to fill the square in the center of the menu
shown above. Highlight Measure and press d to measure a new value
for white balance (the shutter will be released and the camera will return
to the original zoom position, but no picture will be recorded).
WHITE BAL PRESET
OK
Cancel
Measure
White balance measuring
window