Filter
Top Products
19
Charging the Battery
First Steps
4
Plug the Charging AC Adapter into an
electrical outlet.
• The camera’s power-on lamp slowly blinks orange to
indicate that the battery is charging.
• About three hours and 30 minutes are required to
charge a fully exhausted battery.
• The following chart explains power-on
lamp status when the camera is
plugged into the electrical outlet.
5
Disconnect the Charging AC Adapter from the electrical outlet and
then disconnect the USB cable.
Power-on lamp Description
Blinks slowly (orange) Battery charging.
Off
Not charging. When the power-on lamp changes from slow
blinking (orange) to off, charging is complete.
Flickers (orange)
• Operating temperature range exceeded. Charge the
battery indoors with an ambient temperature of 5 °C to
35 °C (41 °F to 95 °F).
• A USB cable is incorrectly connected, a Charging AC
Adapter is incorrectly plugged in, or the battery is faulty.
Disconnect the USB cable or unplug the Charging AC
Adapter and correctly connect it again, or change the
battery.