Filter
Top Products
107
Shooting Options: The Shooting Menu
Shooting, Playback and Setup Menus
ISO sensitivity
When ISO sensitivity is set to 3200 or 6400, Image size cannot be set to
M3648×2736, E 3264×2448, D 2592×1944, I 3648×2432, G 3584×2016,
and H 2736×2736. At these image size settings, selecting 3200 or 6400 for ISO
sensitivity automatically switches the Image size setting to C 2048×1536.
When any option other than 3200 or 6400 is next selected for ISO sensitivity, the
original image size setting is restored.
At an ISO sensitivity setting of 3200 or 6400, the Multi-shot 16 option of the
continuous shooting mode is not available. At a Continuous setting of Multi-shot
16, selecting 3200 or 6400 for ISO sensitivity switches the Continuous setting
to Single. The Continuous setting does not change even when ISO sensitivity is
set to options other than 3200 or 6400.
Continuous
Selecting an option other than Single for Continuous turns Auto bracketing off.
Selecting Multi-shot 16 changes image quality setting to b Normal and image
size setting to D 2592×1944.
When Continuous, BSS, or Multi-shot 16 is selected, noise reduction will not be
performed regardless of whether Noise reduction is set to Auto.
Auto bracketing
When Auto bracketing is enabled, Continuous will be set to Single and the flash
mode will be disabled (W).
AF area mode
When AF area mode is set to Center while Metering is set to Spot AF area, the
Metering setting will automatically change to Matrix. When a setting other than
Center is next selected for AF area mode, the Metering setting automatically
reverts back to Spot AF area.
Noise reduction
When Auto of Noise reduction is applied with Continuous set to an option other
than Single or Intvl timer shooting, or with Auto bracketing set to an option
other than Off, noise reduction will not be performed. Selecting On for Noise
reduction changes Continuous to Single, when an option other than Intvl timer
shooting is selected for Continuous, and Auto bracketing to Off.
Distortion control
When Distortion control is set to Auto, Continuous is automatically set to
Single and Auto bracketing is set to Off.
Even when the Distortion control option is disabled, the Continuous and Auto
bracketing settings do not change.