Filter
Top Products
124
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
i Sound Settings
Adjust the following sound settings.
k Auto Off
If no operations are performed for the selected length of time, the monitor will
turn off and the camera will enter standby mode (A 17) to reduce the drain on
the battery. The power-on lamp will blink in standby mode. If no operations are
performed for about another three minutes, the camera will turn off automatically.
Choose the time allowed to elapse before the camera enters standby mode. The
time options are 30 s, 1 m (default setting), 5 m, and 30 m.
C Notes on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC
adapter is connected.
Button sound
Turn button sound on or off.
When On (default setting) is selected, a beep will sound once when operations are
completed successfully, twice when the camera acquires focus on the subject, and
three times when an error is detected. Start-up sound will also play when the
camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.