Filter
Top Products
52
P, S, A and M modes
M (Manual) Mode
Set the shutter speed and aperture value, and shoot pictures (A 48).
1 Rotate the mode dial to M.
2 Press the multi selector K to activate the
shutter speed setting.
The active setting switches between shutter speed and
aperture each time the multi selector K is pressed.
At speeds slower than 1/4 sec., the shutter speed
indicator turns red (A 50).
3 Rotate the command dial to choose
a shutter speed between 1/2,000
sec. and 8 sec.
When adjusting aperture or shutter speed,
the degree of deviation from the exposure
value measured by the camera is displayed
for a few seconds in the exposure display.
The degree of deviation in the exposure
display is shown in EVs (-2 to +2 EV in
increments of 1/3 EV). A display similar to
that illustrated at right indicates that the
picture will be overexposed by 1 EV (+1).
4 Press the multi selector K to activate the
aperture setting.
20
20
20
1/125
1/125
1/125 F2.8
F2.8
F2.8
20
20
20
1/125
1/125
1/125 F2.8
F2.8
F2.8
20
20
20
1/60
1/60
F2.8
F2.8
1/60 F2.8
+2 -20
+
+1 -1
Overexposed Underexposed
Values in EVs
20
20
20
1/250
1/250
F2.8
F2.8
F2.81/250