Filter
Top Products
94
Using GPS/Electronic Compass (COOLPIX S9300 only)
Using GPS/Electronic Compass (COOLPIX S9300 only)
Starting GPS Data Recording
The camera’s internal GPS receives signals from the GPS satellites and calculates its
current time and position.
Calculation of the position is known as positioning.
The position information (latitude and longitude) can be recorded on the pictures
to be shot.
To start recording of the position information, set GPS options to Record GPS
data.
Set the camera's Time zone and date (A100) before using the GPS function.
1 Use the multi selector to select Record GPS
data and press the k button.
2 Select On and press the k button.
• Signals are received from the GPS satellite and
positioning starts.
• The default setting is Off.
3 Press the d button.
• The camera returns to the shooting screen.
• Operate in an open-air area when starting to receive signals from GPS satellites.
Press the d button Mz (GPS options) tab (A11) M GPS options
Update A-GPS file
Synchronize
Record GPS data
GPS options
Off
On
Record GPS data