Filter
Top Products
60
Features That Can Be Set Using the Multi Selector
Shooting Features
Using the Flash (Flash Modes)
You can set a flash mode that suits the shooting conditions.
1 Press H (m flash mode) on the multi selector.
2 Use the multi selector to select the desired
mode and press the
k button.
• See “Available Flash Modes” (A61) for more
information.
• If the k button is not pressed within a few seconds,
the selection will be canceled.
• When U (auto) is applied, D is only displayed for
a few seconds, regardless of Photo info settings
(A100).
3 Frame the subject and take a picture.
• The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On: The flash will fire when you press the
shutter-release button all the way.
- Flashing:The flash is charging. The camera cannot
take pictures.
- Off: The flash will not fire when a picture is
taken.
• If the battery is low, the monitor will be turned off while
the flash is charging.
C Effective Range of the Flash
The flash has a range of about 0.5 to 5.1 m (1 ft 8 in. to 16 ft) for wide-angle position, and about 1.5 to
3.0 m (5 ft to 9 ft 10 in.) for telephoto zoom position (when ISO sensitivity is set to Auto).
Auto