Filter
Top Products
102
The Setup Menu
General Camera Setup
Language Change the camera’s display language.
E78
TV settings
Adjust settings for connection to television.
• When the camera is connected to a television using
an audio/video cable but no picture is displayed on
the television, set Video mode to NTSC or PAL
according to the type of signal compatible with the
television.
• HDMI settings can be set.
E79
Charge by computer
When set to Auto (default setting), you can charge the
camera’s battery by connecting the camera to a
computer (provided that the computer is able to
supply power).
• When charging by computer, it may take more time
to charge the battery than when using the Charging
AC Adapter EH-69P. Additionally, when charging by
computer and transferring images to the computer,
it takes more time to charge the battery.
E80
Blink warning
When the camera detects that a human subject may
have closed their eyes immediately after taking a
picture using face detection while shooting with
modes other than the continuous shooting mode or
smart portrait mode (A75), the Did someone blink?
screen is displayed on the monitor to check the picture
taken. The default setting is Off.
E82
Eye-Fi upload
Set whether or not to enable the function for sending
images to a computer using a commercially available
Eye-Fi card. The default setting is Disable.
E83
Filmstrip
When On is selected, thumbnails of previous and
subsequent images are displayed at the bottom of the
monitor when you rotate the multi selector quickly
while viewing an image in full-frame playback mode
(A30). The default setting is Off.
E84
Reset all
Reset the camera’s settings to their default values.
• Some of the settings such as Time zone and date
and Language are not reset.
E84
Firmware version Display the current camera firmware version.
E88
Option Description A