Filter
Top Products
5.
Check battery power.
Set the power switch to ST
BY
(standby position) or
ON
to turn
on
the SB-24.
With alkaline-manganese batteries:
If the ready-light takes more than 30 seconds to light
up, replace batteries with a fresh set.
With NiCd batteries:
If the ready-light takes more than
10
seconds to light
up, recharge them.
4
6.
Adjust flash head.
Tilt the flash head to the
normal shooting position,
and confirm flash head
is
locked.
- Shooting distance indicator bars do not appear
in
the
LCD
panel if the flash head
is
ti
lted or rotated.
-
If
the flash head
is
set at - r , distance indicator
bars blink.