Filter
Top Products
MANUAL
MULTIPLE
FLASH
PHOTOGRAPHY
Connect S8-24 and other flash units via the S8-24's multiple
flash terminal, using optional Nikon Sync Cord
SC-11
or
SC-15.
For correct exposure
in
manual multiple flash operation, be sure
all flash units are set
at
manual flash mode.
Caution:
To
avoid damage to flash
un
its or incorrect operation,
never mix Nikon Speedlights with flash units of other
manufacturers.
For multiple flash photography using Nikon
F4
or
F-801/N8008
, if the electric current
in
the synchro circuit
exceeds a certain level, you may not be able to take a
second shot after taking the first shot.
Take
care that the
combined total of the coefficients (numbers shown
in
parenthesis below) for all speedlight's used at anyone
time does not exceed 20 at
20°C/68°F
(13
at 40°C/104°F).
S8-24 (1) S8-23 (4) S8-22 (6)
S8-21
(4) S8-20 (9)
S8-19 (2) S8-18 (16) S8-17 (4) S8-16 (4)
S8
-15
(4)
S8-14 (1) S8-12 (1)
S8-11
(1)
If you are unable to take a second shot, disconnect the
master speedlight from the camera, or turn each of the
speedlights off and
on
once. This resets the circuits so
you can resume shooting.
91