Filter
Top Products
14
Contacts list
3. Write down your interaction with
the recorded prompts step-by-
step. Note that each voice mail
service may vary. Your steps may
resemble the following:
Dial 083210, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press *.
Be precise; you will need this
information in ”Set up voice mail
with dialling codes” on page 14.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. When the desired
code appears in the display, pause
briefly and the code is inserted into
the dialling string.
The following dialling codes are
available:
Set up voice mail with dialling
codes
1. In the standby mode, select
Contacts > Speed dials.
2. Scroll to an empty speed dialling
slot, and select Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes, and enter
any codes as necessary using the
information that you saved from
”Write down number and
process” on page 13.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
083210pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and select OK.
6. Enter a name (such as voice mail),
and select OK.
To dial and listen to your voice mail,
press and hold the assigned speed
dialling key in the standby mode.
Save addresses and notes
To save an address or note, add it to
an existing entry (contact).
1. In the standby mode, scroll down
to display a list of entries in your
contacts list.
Dialling
code
Indicates...
* Bypasses a set of
instructions.
+ Causes the international
access code to be
replaced by +.
p Pauses for 2.5 seconds
before sending any
numbers that follow.
w Waits for you to press
the call key before
sending the numbers or
codes that follow.