Filter
Top Products
Settings
37
1. In the standby mode, select Menu >
Settings > Phone settings >
Automatic keyguard > On or Off.
2. If you select On, Set delay:
appears.
3. Enter the delay (in hh:mm
format), and select OK.
When keyguard is on, it may be
possible to dial the emergency
number.
DTMF tones
DTMF tones are the tones that sound
when you press the keys on your
phone keypad. You can use DTMF
tones for many automated dial-up
services such as banking and airlines
or for entering your voice mailbox
number and password.
DTMF tones are sent during an active
call. You can send them manually
from your phone keypad, or send
them automatically by saving them
in your phone.
Set type
In the standby mode, select Menu >
Settings > Phone settings > DTMF
tones > Manual DTMF tones and on
of the following options:
Continuous — The tone sounds for as
long as you press and hold a key.
Fixed — Used to send tones of the
duration you specify in the DTMF
tone length option.
Off — Used to turn off tones. No
tones are sent when you press a key.
Set length
You can also specify DTMF tone
length when using the Fixed option.
In the standby mode, select Menu >
Settings > Phone settings > DTMF
tones > DTMF tone length > Short
(0.1 seconds) or Long (0.5 seconds).
Welcome note
You can write a welcome note that
briefly appears whenever you switch
your phone on, if provided by your
service provider.
Predictive text input is not available
for entering welcome note text.
1. In the standby mode, select
Menu > Settings > Phone
settings > Welcome note.
2. Enter a note (up to 44 characters).
Press * to display and select from
available special characters.
3. When you are finished, select
Options > Save.
Select Delete if you want to delete
the previous text and begin creating
another welcome note.
Banner
Banner is a network service. See
”Network Services” on page viii for
more information.