Filter
Top Products
93
EN
Information
11
Error codes
Monitor
indication
Possible cause Corrective action
NO CARD
The card is not inserted, or it
cannot be recognized.
Insert a card or insert a different
card.
CARD ERROR
There is a problem with the
card.
Insert the card again. If the
problem persists, format the
card. If the card cannot be
formatted, it cannot be used.
WRITE PROTECT
Writing to the card is prohibited.
The card write-protect switch is
set to the “LOCK” side. Release
the switch. (P. 96)
CARD FULL
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card
and print reservation or new
images cannot be recorded.
•
•
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
CARD SETUP
CLEAN CARD
FORMAT
Clean the contact area of
the card with a dry cloth.
SET
Card cannot be read. Card may
not have been formatted.
Select [CLEAN CARD], press
the Q button and turn off the
camera. Remove the card and
wipe dry the metallic surface
with a soft, dry cloth.
Select [FORMAT][YES], and
then press the Q button to
format the card. Formatting
the card erases all data on
the card.
•
•
NO PICTURE
There are no pictures on the
card.
The card contains no pictures.
Record pictures and play back.
PICTURE ERROR
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
playback on this camera.
Use image processing software
to view the picture on a PC.
If that cannot be done, the image
fi le is damaged.
THE IMAGE
CANNOT BE
EDITED
Pictures taken with another
camera cannot be edited on this
camera.
Use image processing software
to edit the picture.
PICTURE
ERROR
Images can not be transferred
between devices that
are currently receiving or
transmitting data.
Increase the amount of memory
available on the card, for
example by deleting unwanted
images, or choose a smaller size
for the images being transmitted.