Filter
Top Products
102
CONNECTING TO A TELEVISION
Recorded images can be viewed on a TV (PAL only).
Make sure that the power of the TV and the camera are off before
connecting.
Connect the cable by inserting
it into the video output
connector of the camera and
the input connector of the TV.
Turn on the TV.
Set the Mode dial to
.
Select a picture using the Jog
dial.
[When using the remote control]
Aim the remote control at the
Remote control window on the
camera. Press the +/– buttons to
select a picture. Press the W button
for Index-Display. Press the T button
for Close-Up display, and select the
section to view with the +/– buttons.
4
3
2
1
Note:
• The LCD monitor turns off automatically when connected to a TV.
• Refer to your TV/VCR instruction manual for information about displaying
video images.
• The picture may appear to be off-center on the TV screen because of the
TV adjustment.
• Your TV may produce a black frame around the picture, which may look
peculiar when printed to a video printer.
• The use of the optional AC adapter is recommended.
• Images shown on screen can be saved to a video tape.
Video output connector
Video cable
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
4
3
1