Filter
Top Products
86
EN
5
Playback functions
1 MENU[q][EDIT][SEL. IMAGE]
• Selection is also possible during playback by pressing
the i button.
2 Use hi to select an image, then press the i
button.
• The camera recognizes the image data format.
• For images recorded in JPEG+RAW, a selection
screen will appear, asking you which data to edit.
• You cannot edit movies.
3 The setting screen varies with the image data format. Select the item you want to
edit and do the following steps.
• The edited image is saved as another image, apart from the original image.
• To exit the edit mode, press the MENU button.
x Notes
• Red-eye correction may not work depending on the image. Red-eye correction may affect
other parts of the image, as well as the eyes.
• Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when there is not
enough space in the card memory, when an image is recorded on another camera.
• When resizing ([Q]) an image, you cannot select a larger number of pixels than was
originally recorded.
• [P] and [ASPECT] can only be used to edit images with an aspect ratio of 4:3 (standard).
Adding sound to still pictures
When playing back still pictures, a maximum of 30 seconds of sound can be added
(recorded) and this can be added as a memo after shooting pictures.
1 MENU[q][EDIT][SEL. IMAGE][R]
• Selection is also possible during playback by pressing the i button.
2 Select using fg, then press the i button.
[NO] : No sound is recorded.
[R START] : Audio recording starts.
[YES] : Erases added sound.
x Notes
• You cannot record sound for protected images.
• To stop recording part-way through, press the i button.
BACK SET
100-0020
100-0020
L
N
N
40
40
Confirm the data format from here.
JPEG EDIT
BACK SET
SHADOW ADJ
REDEYE FIX
ASPECT
BLACK & WHITE
YES
NO
RAW DATA EDIT
BACK
SET
s0026_e_00_0_unified.book Page 86 Tuesday, September 29, 2009 10:30 AM