Filter
Top Products
E-6
How to Use the Lens Cap Holder
The lens cap fits inside the lens cap holder as shown in the illustra-
tion.
When using the self-timer or remote control, the viewfinder can be
covered with the lens cap holder to block incoming light from behind
the camera.In such case, attach the lens cap as shown in the illus-
tration.
1
1
Attaching the Strap
How to Attach the Strap
Attach the strap to the camera.
Take the loop and frame off the strap.
Thread the strap through the lens cap holder.
Reattach the loop and frame to the strap.
Feed the strap through the eyelet on the camera, and thread the
end of the strap back through the frame and under the loop.
4
3
2
1
NOTE
• Rig up the strap as shown in the illustration.Olympus will not
assume any responsibility whatsoever for damage if the camera is
dropped because the strap was improperly rigged and came loose.
1
4
3
2