Filter
Top Products
EN
AUTO OFF (AUTO POWER-OFF)
You can set the camera to turn off automatically when no operation is
performed. The period of time before shut-down can be adjusted (None,
1 min., 3 min., or 5 min.) The default auto off time setting is 3 min.
NOTE: Auto Off is not available in slideshow mode or when the camera
is connected to a PC.
TV OUT
If connecting the camera to a TV, you can set the camera’s TV output
system to either the PAL or NTSC standards. The default TV Out setting
is set to PAL.
FILE NUMBER
Your camera keeps an internal file counter for every image and movie
taken that can be reset. The setting options are Continue and New
(default setting).
NOTE: All files are stored within a designated folder. The initial folder
is always numbered at 100.
A. Under the Continue default option, the internal file counter is
first set to “0001”. Every subsequent picture is assigned an
incremental File Number.
NOTE: The internal file counter increments by 1 regardless of the
media unless it is reset.
B. Under the New option, the internal file counter to “0001” for new
media only. But in case there are image files already present
inside the storage media, it will start counting from the highest
file number of the media.
NOTE: The File Number setting should be set to New only if either the
internal memory or SD card has been newly formatted, or a completely
new SD card has been installed.
13
PV100 Eng R7 a OP 9/9/04, 2:45 PM14