Filter
Top Products
E-31
Shooting techniques for different targets
Press REC CHECK in the shooting standby mode
and two seconds of the last thing you shot play, and
then the camera returns to the shooting standby
mode.
• REC CHECK does not work if you have shot for
less than a second.
• Note that this REC CHECK portion will also be
recorded to any equipment you have set up to
make backup recordings.
While in the shooting standby mode, you can
search through any images you have shot.
This is useful when you want to find a point from
which to continue shooting so two scenes come
one after the other.
1 Press the OPERATION lever y or t.
The tape plays forward or backward while you
are holding the lever in position.
2 Release the lever when you find the point you
are looking for.
The camera returns to shooting standby mode.
This camera has a 10 x zoom.
Zoom with the zoom button or the zoom ring.
Zoom button
Set the ZOOM switch to SERVO so that you can
use the motor-driven zoom.
T: Zoom in
W: Zoom out
Gently press the zoom button on the viewfinder to
zoom slowly, firmly press to zoom faster.
You can change the zoom speed on the handle
zoom button by selecting one of three speeds with
the HANDLE ZOOM switch.
Set HANDLE ZOOM switch speeds by going to the
setup menus, SW MODE screen HANDLE ZOOM.
(Page 70)
Zoom ring
Set the ZOOM switch to MANU so that you can use
the zoom ring.
• You cannot use the zoom ring if the ZOOM switch
is set to SERVO. Trying to use it could damage
the camera.
On the remote control
Press ZOOM/VOL to zoom with the motor drive.
Zoom speed is fixed at medium.
Check what you have shot (rec check)
Finding specific scenes
(image search)
REC CHECK button
STILL ADV
PAUSE
STILL ADV
INDEX
SELECT
STOP INDEX
MULTI/
P-IN-P
REC A.DUB
PLAY
VOL +
-
Camera or remote control
Zoom
SERVO
MANU
ZOOM
Zoom button (handle)
HANDLE ZOOM switch
Zoom ring
Zoom button
ZOOM switch
AG-DVX100B_EN.book 31 ページ ２００５年１０月５日 水曜日 午前１０時５２分